Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xt 250
Part: Engine oil

This brief procedure will show us how to perform the regular maintenance of changing the engine oil and oil filter on the Yamaha XT 250 enduro motorcycle. First, we put the motorcycle on the stand and start by loosening the oil drain bolt located under the engine, letting it drain into a container for about ten minutes; then we unscrew the screws of the oil filter cover located on the right side, removing and replacing the filter cartridge with a new one, as shown in the video. Finally, we pour in the new oil to complete the maintenance service!

Posted on 29 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Yamaha XT 250?
How to change the motor oil of a Yamaha XT 250?
Xt 250 The Yamaha XT 250 is a motorcycle and, like all motorcycles, does not use a steering wheel or buttons for operations such as changing the engine oil.…
How to Set the Time on the Yamaha XT 250
How to Set the Time on the Yamaha XT 250
Xt 250 This tutorial shows how to set the time on the Yamaha XT 250, a very simple and quick operation to perform, for example, after disconnecting the batt…
How to replace the headlight bulb in the Yamaha XT 250?
How to replace the headlight bulb in the Yamaha XT 250?
Xt 250 In this tutorial we can see how to replace the headlight bulb in the Yamaha XT 250, an extremely simple and quick operation. First of all, make sure …

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos