Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the time on the Yamaha Road Star Warrior?

Model: Yamaha Road Star Warrior
Part: Clock

Video tutorial

In this tutorial we can see how to adjust the time on the Yamaha Road Star Warrior, an extremely simple and quick operation, to be carried out for example after disconnecting the battery or following the switch to daylight saving time. First of all, insert the key, then turn on the instrument panel and hold down both dashboard buttons for the necessary time for the clock to start flashing.

Adjust the hour at this point with the right button, move on to the minutes with the left button and, in the same way, adjust them as well before saving the setting.


Posted on 9 September 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Yamaha Road Star Warrior
How to Replace the Front Headlight Bulb on a Yamaha Road Star Warrior
Road Star Warrior In this tutorial, you will see how to replace the front headlight bulb on a Yamaha Road Star Warrior, a very simple and quick operation. First, ensur…
What is the fuse diagram for the Yamaha Road Star Warrior?
What is the fuse diagram for the Yamaha Road Star Warrior?
Road Star Warrior In this video, we can see where the fuse box of the Yamaha Road Star Warrior is located and what the corresponding diagram is, useful in case we need…

How to Change the Engine Oil on a BMW R1200T?

To change the engine oil on a BMW R1200T, follow these steps. Ensure the bike is on a level surface and the engine is warm but not too hot. Remove the oil filler cap and the oil drain plug, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew it to fully drain the used oil. Once drained, remove and replace the oil filter, ensuring to clean the mounting surface thoroughly. Install the new filter and screw the oil drain plug back in. Fill the engine with new oil through the filler cap until reaching the recommended amount, checking the level with the dipstick if necessary. Secure both caps tightly. Start the engine for a few minutes to circulate the new oil, then turn it off, and the replacement is complete.

Watch the video!


by ScegliAuto

More videos