Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

OBD2 port location on the X-Max125

Model: Yamaha Xmax 125
Part: Checks and maintenance

Video tutorial

In this video, we see where the diagnostic port of the X-Max 125 scooter is located: like most scooters or motorcycles, the diagnostic port is located under the seat. In the specific case of this vehicle, it is located in the under-seat compartment, but not in the tray, but under the seat stop, in a small compartment where the cover must be opened and then the red plug disconnected, which then turns out to be the OBD diagnostic port.

Through this device, we can diagnose and reprogram the ECU; of course, an OBD tool is necessary to communicate with the vehicle.


Posted on 6 October 2025 by ScegliAuto


Related tutorials

Where is the OBD2 Port on the Opel Meriva A?
Where is the OBD2 Port on the Opel Meriva A?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Knowing the location of the OBD2 port on your Opel Meriva A is very important as it allows you to connect any compatible diagnostic tool to identify …
Where is the OBD2 port located in the Renault Twingo?
Where is the OBD2 port located in the Renault Twingo?
Renault Twingo (1993-2007 / Twingo 1) In this new guide, we will explain to you where the OBD2 port is located inside your first series Renault Twingo. First of all, you need to reach the…
Where is the OBD2 port located in the Suzuki Ertiga 2?
Maruti Ertiga (2018-2025 / MK 2) To locate the OBD2 port inside the cabin of your Suzuki Ertiga second series by yourself, simply follow the steps described. First, get into the car …

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos