Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will see the steps that will allow us to reset the transmission belt change warning on the Yamaha Xmax 300 scooter. First, put the scooter on the stand and start the instrument panel; go to the trip A item on the display of the panel, turning off the panel again. At this point, hold down the trip button to the left, turning on the instrument panel; wait for the transmission belt change warning to be reset, thus resetting the mileage counter. Finally, turn off the panel and start the engine!

Posted on 7 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Xmax 300 This guide will show you how to reset the belt change warning light on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and …
Reset the belt change warning on the Yamaha Xmax 300.
Reset the belt change warning on the Yamaha Xmax 300.
Xmax 300 These short and simple instructions will show us how to reset the transmission belt change on the Yamaha Xmax 300 scooter. First of all, we put the s…
How to reset the transmission belt change indicator on the Yamaha Xmax 300
How to reset the transmission belt change indicator on the Yamaha Xmax 300
Xmax 300 Today we will see the information related to the reset of the transmission belt change warning for the Yamaha Xmax 300 scooter. First, we put the sco…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos