Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Belt Change Warning Light on a Yamaha Xmax 300

Model: Yamaha Xmax 300
Part: Warning light – error code

Video tutorial

This guide will show you how to reset the belt change warning light on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and turn the key to position one to power on the instrument cluster.

Navigate to the belt settings menu and press and hold for about five seconds until it starts flashing, as shown in the video. Then, hold the button for another twenty seconds to permanently reset the belt change light!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Resetting the Maintenance Light on Yamaha Xmax 300
Resetting the Maintenance Light on Yamaha Xmax 300
Xmax 300 These brief and simple steps will show you how to reset the service maintenance light on the Yamaha Xmax 300 scooter. First, place the scooter on the…
How to Reset the Service Light on the Yamaha XMAX 300 Scooter?
How to Reset the Service Light on the Yamaha XMAX 300 Scooter?
Xmax 300 In this tutorial, you can see how to reset the service light on the Yamaha XMAX 300 scooter, a very simple and quick operation that should only be do…
How to Reset the "Service" Light on a Yamaha Xmax 300
How to Reset the "Service" Light on a Yamaha Xmax 300
Xmax 300 Before you begin, sit on the seat of your Yamaha Xmax 300. Start by activating the instrument panel by turning the key in the ignition switch. Then, …

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos