Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Wr 450f

How to change the engine oil of a Yamaha WR 450?

Model: Yamaha Wr 450f
Part: Engine oil

Video tutorial

To change the motor oil of a Yamaha WR 450, make sure first that the engine is warm to facilitate the draining of the old oil. Position the motorcycle stably and locate the oil drain plug under the engine. Use a wrench to carefully unscrew the plug, allowing the used oil to fully drain into a suitable container.

Once the oil has finished draining, carefully screw the drain plug back in, making sure it is tightly secured to prevent leaks. Next, remove the oil tank cap and pour in the new oil, making sure to use the recommended quantity and type of oil as stated in the manual.

Check the level with the dipstick or measuring cap, adjusting if necessary.


Posted on 31 October 2025 by ScegliAuto


Related tutorials

How to Replace the Battery on the Yamaha WR 450F?
How to Replace the Battery on the Yamaha WR 450F?
Wr 450f To replace the battery on the Yamaha WR 450F, loosen the side screws securing the seat to its housing so that it can be fully lifted, providing acces…

How to Remove the Radiator from an Aprilia RSV 1000R

This guide provides the main instructions for removing and replacing the cooling radiator of the Aprilia RSV 1000R motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing screws of the side plastic fairings to remove them; then disconnect the radiator hoses, draining the fluid into a container, and unscrew the bracket screws to remove it from the frame and engine, as illustrated in the video. At this point, install the new radiator and finally top up with the new antifreeze!

Watch the video!


by ScegliAuto

More videos