Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Yamaha MT-07?

Model: Yamaha Mt 07
Part: Engine oil

Video tutorial

In this tutorial, we will see how to replace the engine oil in the Yamaha MT-07, a process that is extremely simple and quick. First, let's make sure that the engine is cool enough.

Then, we position a container underneath it, locate the drain hole bolt, and unscrew it using a 17mm socket wrench. Next, we let all the oil contained in the system drain out, unscrew the old filter, and tighten both the replacement filter and the bolt.

At this point, all that's left to do is to pour in the necessary amount of oil through the designated upper hole.


Posted on 1 December 2025 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
Mt 07 Replace the engine oil and oil filter as part of the routine maintenance service on your Yamaha MT 07 by following the instructions below. First, pla…
How to Change Engine Oil and Oil Filter on a Yamaha MT-07
How to Change Engine Oil and Oil Filter on a Yamaha MT-07
Mt 07 Let's go through the steps to change the engine oil and oil filter on the Yamaha MT-07, following the instructions below. First, unscrew and remove t…
How to Change the Engine Oil and Oil Filter on the Yamaha MT-07
How to Change the Engine Oil and Oil Filter on the Yamaha MT-07
Mt 07 Today, we will discover the necessary instructions to carry out the routine maintenance service by changing the engine oil and oil filter on the Yama…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos