Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Nmax 125
Part: Battery

Today we will explain how to replace the battery of the Yamaha Nmax 125. The steps to follow are simple and quick. The first step is to open the seat of our vehicle to access the battery compartment. We remove the battery protection cover and proceed with its removal. Disconnect the positive terminal and then the negative terminal, unscrew the bracket on the back of the battery, and remove it. Insert the new battery and connect the negative terminal followed by the positive terminal. Screw the bracket and the cover back on before proceeding with the test to check its functionality. The battery we will use for the replacement is a TokioHama model YTZ7S-BS.

Posted on 11 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Nmax 125 Following these short and simple steps, we will see how to disassemble and replace the battery of the Yamaha Nmax 125 scooter. First of all, put the …
Nmax 125 If the time displayed on the central panel of your Yamaha NMax 125 is incorrect and you want to manually change it, all you have to do is follow thes…
Nmax 125 In this tutorial, we will see how to reset the service on the Yamaha NMAX 125 scooter, a very simple and quick operation to perform only after comple…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos