Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fz 6
Part: Engine oil

How to replace oil and oil filter on a Yamaha Fz6? Follow this guide to perform maintenance. Position your bike on its original stand; using a fixed spanner, unscrew the bolt from the oil sump and drain the fluid into a container. Unscrew the securing screws of the metal container cap (on the right side of the engine) where the filter is located. Remove the worn oil filter and install a new one after cleaning (check the seal around the metal cap). Finally, top up with new oil in the engine. Test the engine's operation.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fz 6 To change the engine oil of the Yamaha FZ6, unscrew the drain plug of the oil reservoir, located at the bottom of the bike, near the start of the exh…
Fz 6 Remove the original engine air filter from a Yamaha Fz6. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand…
Fz 6 Before you can start, position your Yamaha FZ6 upright. Begin by unscrewing and removing the bolts that secure the tank, then lift the front of the t…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos