|
Do it yourself
| |||
| ||||
Model: Yamaha Fz 6
To change the engine oil of the Yamaha FZ6, unscrew the drain plug of the oil reservoir, located at the bottom of the bike, near the start of the exhaust. Once unscrewed, you can collect the used oil in a suitably positioned container; near the drain plug, there will also be the oil filter, which must be unscrewed and replaced with a new one. After these operations, you can top up by inserting the new oil through the breather located on the right side crankcase of the bike.
Updated on 3 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Fz 6
How to replace oil and oil filter on a Yamaha Fz6? Follow this guide to perform maintenance. Position your bike on its original stand; using a fixed …
Fz 6
To replace the clutch on your Yamaha FZ6, loosen the bolts securing the cover located on the right side of the bike, halfway up. Once the cover bolts…
Fz 6
To replace the exhaust on a Yamaha FZ6, loosen the screws securing all the panels covering the rear mudguard of the bike. To remove these panels, you…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
