Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fz 6
Part: Clutch

To replace the clutch on your Yamaha FZ6, loosen the bolts securing the cover located on the right side of the bike, halfway up. Once the cover bolts are loosened, remove the cover to access the underlying clutch. The clutch must be extracted from its housing by removing all the plates, allowing the new replacement part to be inserted. After installation, reattach the cover with its bolts, start the engine, and ensure it operates correctly.

Updated on 11 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Fz 6 To replace the clutch on the Yamaha FZ6 R, loosen the bolts securing the circular cover that contains the clutch, located on the right side of the bi…
Fz 6 To change the engine oil of the Yamaha FZ6, unscrew the drain plug of the oil reservoir, located at the bottom of the bike, near the start of the exh…
Fz 6 Remove the original engine air filter from a Yamaha Fz6. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos