|
Do it yourself
| |||
| ||||
Model: Yamaha Fz 6
To replace the exhaust on a Yamaha FZ6, loosen the screws securing all the panels covering the rear mudguard of the bike. To remove these panels, you will need to detach the seat first. Once all the panels are removed, locate the screws securing the exhaust to the brackets at the rear. By also removing the ring that secures it to the engine block, you can completely slide out the old exhaust, allowing you to insert and secure the new replacement part.
Updated on 18 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Fz 6
To change the engine oil of the Yamaha FZ6, unscrew the drain plug of the oil reservoir, located at the bottom of the bike, near the start of the exh…
Fz 6
To replace the clutch on your Yamaha FZ6, loosen the bolts securing the cover located on the right side of the bike, halfway up. Once the cover bolts…
Fz 6
How to replace oil and oil filter on a Yamaha Fz6? Follow this guide to perform maintenance. Position your bike on its original stand; using a fixed …
|
How to Remove the Engine from the Piaggio Vespa GTS 250 - 300
In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
