Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Virago 125
In this tutorial, we will see how to replace the engine oil in the Yamaha Virago 125, a very simple and quick operation. First of all, we wait for the engine to be cool enough, then we place a container under the bike, locate the drain hole bolt, and unscrew it using a 17mm socket wrench. We let all the oil contained in the system drain out, open the filter cap with a hex key, and insert the replacement. At this point, all that’s left is to reassemble everything and pour in the necessary amount of oil through the designated upper hole.

Posted on 20 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Yamaha Virago 125?
How to Replace the Front Brake Pads on a Yamaha Virago 125?
Virago 125 In this tutorial, you will learn how to replace the front brake pads on a Yamaha Virago 125, a very simple and quick operation. First, position yours…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos