Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Virago 125 : How to replace the front brake pads on the Yamaha Virago 125?

Model: Yamaha Virago 125
Part: Brake pads
How to replace the front brake pads on the Yamaha Virago 125?

In this tutorial we can see how to replace the front brake pads on the Yamaha Virago 125, a very simple and quick operation. First of all, position yourself in front of the brake in question, then loosen the lower bolt using a hex key. Then, unscrew the fixing bolts of the caliper to the fork, separate it from the disc and remove the previously loosened pin. At this point, we can remove the old pads, clean any residual dirt, compress the piston and insert the replacements. To reassemble everything, simply follow the reverse procedure.


Posted on 16 April 2023 by ScegliAuto

How to change the engine oil of a Yamaha TW 200?

To change the engine oil of a Yamaha TW 200, follow these steps. Make sure the engine is warm. Place the motorcycle on a flat surface. Remove the oil drain plug on the bottom side of the engine. Place a container under the plug to collect the used oil. Allow the used oil to drain completely. Once drained, reinsert the drain plug and tighten it securely. Remove the oil fill cap from the top of the engine. Using a funnel, slowly pour new oil into the oil reservoir, checking the recommended quantity in the owner's manual. After adding the oil, reinsert and tighten the fill cap securely. Start the engine and let it run for a few minutes. Check the oil level and add if necessary. Finally, clean up any spills and dispose of the used oil properly.

Watch the video!


by ScegliAuto

More videos