Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Stryker

Model: Yamaha Stryker
Part: Fuse box

Inside the 2013 Yamaha Stryker motorcycle, there is a fuse box that contains fuses for the: cigarette lighter socket, injectors, radiator, clock, headlight, and tail light. The main fuse is located outside the fuse box but next to it. The fuse box is installed under the seat next to the battery, covered by a plastic lid. To replace a fuse, we need to open the lid using a pair of pliers, remove the damaged fuse, and insert a new fuse of the same amperage in its place.

Updated on 29 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the Fuse Box on the Yamaha FJR 1300?
Where is the Fuse Box on the Yamaha FJR 1300?
Fjr 1300 If you own the new Yamaha FJR 1300 2023 and want to find out where the fuse box is located, read this guide carefully and follow a few simple steps. …
Where is the fuse box of the Yamaha FJR 1300 located?
Where is the fuse box of the Yamaha FJR 1300 located?
Fjr 1300 Today we will explain how to replace a fuse on a Yamaha FJR 1300. The fuse box is located under the instrument panel; to replace a fuse we must remov…
Where are the Fuses on a Yamaha Xmax 250?
Where are the Fuses on a Yamaha Xmax 250?
Xmax 250 The fuses on a Yamaha Xmax 250 are contained within the dedicated fuse box installed on the vehicle: in this case, the box is located at the rear of …

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos