Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Fluid on a Yamaha MT 07

Model: Yamaha Mt 07
Part: Brake fluid

Video tutorial

How to replace the brake fluid on a Yamaha MT 07? Follow this guide to proceed with the replacement. Position the bike on a work stand, undo the securing screws of the container where the brake fluid is located (front or rear).

Use a spanner to undo the fluid bolt above the caliper (drain the fluid into a container). Before refitting the bolt above the caliper, bleed it using a tube.

Finally, top up with new fluid in the oil container and close with the metal cap (bleed until the brake lever pressure is correct).


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
Mt 07 Replace the engine oil and oil filter as part of the routine maintenance service on your Yamaha MT 07 by following the instructions below. First, pla…
How to Change the Engine Oil and Oil Filter on the Yamaha MT-07
How to Change the Engine Oil and Oil Filter on the Yamaha MT-07
Mt 07 Today, we will discover the necessary instructions to carry out the routine maintenance service by changing the engine oil and oil filter on the Yama…
How to Change the Engine Oil in the Yamaha MT-07?
How to Change the Engine Oil in the Yamaha MT-07?
Mt 07 In this tutorial, you will see how to change the engine oil in the Yamaha MT-07, a very simple and quick operation to perform every 12 months. First,…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos