Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Position Light Bulbs on a T-MAX 500

Model: Yamaha T Max 530
Part: Light bulb

Video tutorial

In this video, we can see how to change the position light bulbs on a Yamaha T-MAX 500. You need to access from underneath, and it would be very practical to place a mirror under the scooter instead of going in blind, so you can see what you are doing.

As shown by the YouTuber, if the bulb falls inside the headlight unit, it is not easy to retrieve, so be very careful when removing it from the holder to avoid dropping it. Also, remember not to touch the new bulb with bare hands, as this will at least halve its lifespan.


Posted on 25 March 2026 by ScegliAuto


Related tutorials

How do you reset the engine light on the Yamaha T Max 530?
How do you reset the engine light on the Yamaha T Max 530?
T Max 530 The motorcycle visible in the video below is indeed the one mentioned in the subject, namely the Yamaha T Max 530. Specifically, we are talking about…
How to Change the Remote Battery on a Yamaha T-Max 530
How to Change the Remote Battery on a Yamaha T-Max 530
T Max 530 In this video, you will learn how to change the battery in the remote of a Yamaha T-Max 530: you will need a small, thin flathead screwdriver and a n…
How to set the clock on the Yamaha T Max 530
How to set the clock on the Yamaha T Max 530
T Max 530 In this guide, we will see how to change the time on the display of the instrument panel of the Yamaha T Max 530 scooter. First, put the scooter on t…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos