Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Neo S 50
Part: Clock

In this tutorial, you will see how to set the time on a Yamaha NEO's scooter, a very simple and quick operation, for example, after disconnecting the battery or after switching to daylight saving time. First, insert the key, then turn on the instrument panel and, using the "MENU" button on the left knob, navigate to the odometer "ODO". Hold down the same button until the clock starts to flash, press it quickly to set the hour and hold it down again to switch to minutes. Similarly, you can adjust the minutes and finally save the setting.

Posted on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Yamaha NEO's Scooter?
How to Set the Time on a Yamaha NEO's Scooter?
Neo S 50 In this tutorial, you will see how to set the time on a Yamaha NEO's scooter, a very simple and quick operation to perform, for example, after discon…
Guide to replacing the belt of the Yamaha Neo S 50
Guide to replacing the belt of the Yamaha Neo S 50
Neo S 50 Below we will see the process of disassembling and replacing the transmission belt of the Yamaha Neo S 50 scooter. First, we put the scooter on the c…
How to Replace the Drive Belt on the Yamaha NEO's 50 Scooter?
How to Replace the Drive Belt on the Yamaha NEO's 50 Scooter?
Neo S 50 In this tutorial, you will see how to replace the drive belt on the Yamaha NEO's 50 scooter, a simple operation if you have good manual skills. First…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos