Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's instructions will show you how to reset the service warning light for the engine oil change on the Yamaha Neo S 50 scooter. First, place the scooter on its centre stand and turn on the instrument panel; then press and hold the reset button on the instrument panel for eight seconds, clearing the maintenance warning from the display. Now turn off the instrument panel and start the engine, checking that the service kilometres have reset on the instrument panel display.

Posted on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Engine Oil Change Light on the Yamaha Neos 50
Resetting the Engine Oil Change Light on the Yamaha Neos 50
Neo S 50 Here are the instructions to reset the engine oil change light on the Yamaha Neos 50 scooter. First, place your scooter on the centre stand and press…
How to Set the Time on a Yamaha NEO's Scooter?
How to Set the Time on a Yamaha NEO's Scooter?
Neo S 50 In this tutorial, you will see how to set the time on a Yamaha NEO's scooter, a very simple and quick operation to perform, for example, after discon…
Guide to replacing the belt of the Yamaha Neo S 50
Guide to replacing the belt of the Yamaha Neo S 50
Neo S 50 Below we will see the process of disassembling and replacing the transmission belt of the Yamaha Neo S 50 scooter. First, we put the scooter on the c…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos