Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 300
Part:

Below are the instructions that will allow you to remove and replace the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on the stand and start by removing the side cover, then unscrew the fixing screws of the casing to remove it; next, remove the fan and subsequently the variator, taking out the clutch bell and the drive belt. At this point, replace the belt with a new original one, then reassemble all the transmission components; finally, reattach the side casing of the engine!

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the drive belt of the Yamaha Xmax 300
How to replace the drive belt of the Yamaha Xmax 300
Xmax 300 Let's see the instructions for disassembling and replacing the transmission belt of the Yamaha Xmax 300 scooter. First of all, we put the scooter on …
How to Replace the Belt on a Yamaha Xmax 300?
How to Replace the Belt on a Yamaha Xmax 300?
Xmax 300 To replace the belt on the Yamaha Xmax 300, you need to loosen the bolts securing the cover at the rear wheel, on the left side. Once the bolts are u…
Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Resetting the Belt Change Warning Light on a Yamaha Xmax 300
Xmax 300 This guide will show you how to reset the belt change warning light on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and …

How to Replace the Remote Battery in a Ducati

As shown in this tutorial, replacing the battery in the Ducati Monster 821 is an extremely simple and quick task. First, ensure the key is not inserted. Then locate the plastic cover at the bottom, just below the rear shock absorber, and remove it by unscrewing the respective side screws. If necessary, remove the seat to gain more working space. Once you have access to the battery, disconnect both terminals, support it through the indicated hole, and unscrew the lower fixing bolts. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos