Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This is undoubtedly not a job that can be done in a few minutes, and now we will see why. To replace the bulb in the headlight unit, specifically the front one, on the Yamaha Tmax 500, you need to start by removing the footrests, then gradually remove the fixing screws of the various side and front fairings, and finally those surrounding the instrument panel. At this point, unclip the rear metal clips and extract the bulb and its holder, replace it, and perform a function test before reassembling everything.

Posted on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the headlight bulb of the Yamaha Tmax 500?
How do you replace the headlight bulb of the Yamaha Tmax 500?
Tmax 500 In order to replace the headlight bulb of the Yamaha Tmax 500, you need to loosen the screws that secure the front fairing of the motorcycle, so that…
How to Replace the Battery on the Yamaha TMAX 500?
How to Replace the Battery on the Yamaha TMAX 500?
Tmax 500 Replacing the battery on the Yamaha TMAX 500 involves loosening all the screws located at the front of the bike, removing the front fairing panel. On…
How to reset the Oil Service light on the Yamaha Tmax 500?
How to reset the Oil Service light on the Yamaha Tmax 500?
Tmax 500 To reset the Oil Service light on the Yamaha Tmax 500, turn the ignition key to switch on the instrument panel. Once powered on, repeatedly press the…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos