Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Tenere 700
Part:

To replace the mirrors on a Yamaha Ténéré 700, you will need to loosen the nuts that secure the mirrors to their housings on the sides of the handlebars: once the screws have been removed using an Allen key, you can unscrew the mirrors from their housings and remove them completely. At this point, you can position the new mirrors in their housings, screw them in, and then secure them with the appropriate screws; afterwards, you can adjust them for riding.

Posted on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Tenere 700 To replace the rear brake pads on a Yamaha Tenere 700, you will need a screwdriver and a hammer to remove the pin to which the pads are attached. Pos…
Tenere 700 The clock adjustment of the Yamaha Ténéré 700 is done by turning on the instrument panel, inserting the ignition key into the corresponding ignition …
Tenere 700 To set the clock of the Yamaha Ténéré 700, you need to turn on the instrument panel by inserting the key into the ignition switch: once the panel is …

How to Change the Engine Oil in a Keeway Superlight 125?

This tutorial shows how to change the engine oil in a Keeway Superlight 125, a very simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then position a container underneath the bike, locate the drain bolt, and loosen it using a 17mm spanner. Allow all the oil in the system to drain out, clean any residual dirt, and reassemble everything. Finally, pour the necessary amount of oil through the designated hole, using a funnel if needed.

Watch the video!


by ScegliAuto

More videos