|
Do it yourself
| |||
| ||||
|
Model: Yamaha V Star 650
Descriptive guide for replacing the engine oil and oil filter on a Yamaha V Star 650 motorcycle. Obtain 3 litres of Motul SAE 10W40 oil and an HIFLO HF145 oil filter. Position the motorcycle on a central lift. Start the engine and bring it to temperature, then switch off. Place a container for the used oil under the engine. Using a 17mm socket spanner, unscrew the oil drain plug located under the engine on the left side. Allow all the oil to drain out. Using a ratchet and a 4mm hex insert, unscrew the eight screws of the oil filter cover/case on the right side (round cover with three screws first). Remove the filter cartridge and clean the housing thoroughly. Insert the new filter and replace the sealing gasket of the cover. Screw the oil drain plug back in. Open the oil filler cap located on the right side and pour in the oil using a funnel. The manufacturer specifies 2.8 litres with filter replacement. Pour in the 2.8 litres and check the level through the inspection hole under the filler cap.
Updated on 10 March 2026 by ScegliAuto
Video tutorial
Related tutorials
V Star 650
In this tutorial we can see how to replace the motor oil in the Yamaha V-Star 650, an extremely simple and quick operation. First of all, we wait for…
V Star 650
To replace the air filter on a Yamaha V Star 650, loosen the bolts securing the chrome cover located on the right side of the bike, just below the fu…
V Star 650
To change the gearbox oil of your Yamaha V-Star 650, start by parking the motorcycle on a flat surface and make sure it is stable. First of all, slig…
|
How to Replace the Air Filter on a Honda CB500X?
Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |