Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to reset the service on the Yamaha Aerox 155 scooter, an extremely simple and quick operation, to be performed only after completing all scheduled maintenance tasks. First, insert the key, then turn on the ignition and, using the "MENU" button on the left knob, navigate to the "Trip" odometer. Next, press and hold the same button until the interval starts flashing, release it and press it again until the reset is complete.

Posted on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Yamaha Aerox 155 scooter?
How to replace the engine oil in the Yamaha Aerox 155 scooter?
Aerox In this tutorial we can see how to replace the engine oil in the Yamaha Aerox 155 scooter, an extremely simple and fast operation. First of all, we w…
How to Adjust the Time on the Yamaha Aerox 155 Scooter?
How to Adjust the Time on the Yamaha Aerox 155 Scooter?
Aerox In this tutorial, you will see how to adjust the time on the Yamaha Aerox 155 scooter, a very simple and quick operation to perform, for example, aft…
Where is the spark plug on the Yamaha Aerox 155 scooter and how to replace it?
Where is the spark plug on the Yamaha Aerox 155 scooter and how to replace it?
Aerox In this video, you can see where the spark plug is located on the Yamaha Aerox 155 scooter and how to replace it, a very simple and quick operation. …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos