Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Yamaha Aerox 155 Scooter?

Model: Yamaha Aerox
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a Yamaha Aerox 155 scooter, a very simple and quick operation. First, wait for the engine to be completely cold, then position a container underneath the scooter, locate the drain hole bolt, and undo it using a 17mm socket.

Allow all the oil in the system to drain out, then remove the filter and clean it of any dirt residue. At this point, you can reassemble everything and pour in the new oil through the designated hole.


Updated on 2 October 2026 by ScegliAuto


Related tutorials

Where is the spark plug on the Yamaha Aerox 155 scooter and how to replace it?
Where is the spark plug on the Yamaha Aerox 155 scooter and how to replace it?
Aerox In this video, you can see where the spark plug is located on the Yamaha Aerox 155 scooter and how to replace it, a very simple and quick operation. …
How to Replace the Battery in a Yamaha Aerox 155 Scooter?
How to Replace the Battery in a Yamaha Aerox 155 Scooter?
Aerox In this tutorial, you will see how to replace the battery in the Yamaha Aerox 155 scooter, a very simple and quick operation. First, ensure that the …
How to reset the service on the Yamaha Aerox 155 scooter?
How to reset the service on the Yamaha Aerox 155 scooter?
Aerox In this tutorial, see how to reset the service on the Yamaha Aerox 155 scooter, an extremely simple and quick operation, to be performed only after c…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos