Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug in the Yamaha XMAX 300 Scooter?

Model: Yamaha Xmax 300
Part: Spark plugs

Video tutorial

In this tutorial, see how to replace the spark plug in the Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure the engine is completely cold for safety, then open the seat and remove the internal compartment by unscrewing the relevant bolts with a socket.

Next, locate the spark plug lead, disconnect it, and unscrew the spark plug itself using a 14mm long socket. At this point, simply insert the replacement, tighten it, and reassemble everything by following the reverse procedure.


Posted on 11 May 2026 by ScegliAuto


Related tutorials

How to replace the drive belt of the Yamaha Xmax 300
How to replace the drive belt of the Yamaha Xmax 300
Xmax 300 Let's see the instructions for disassembling and replacing the transmission belt of the Yamaha Xmax 300 scooter. First of all, we put the scooter on …
How to reset the service indicator light on the Yamaha Xmax 300
How to reset the service indicator light on the Yamaha Xmax 300
Xmax 300 The replacement of the motor oil involves resetting the oil change warning that appears on the instrument panel; let's see the reset procedure on the…
How to Replace the Drive Belt on a Yamaha Xmax 300
How to Replace the Drive Belt on a Yamaha Xmax 300
Xmax 300 Below are the instructions that will allow you to remove and replace the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on the s…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos