Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Yzf R7
Part: Clock

In this tutorial, we will see how to set the time on the Yamaha YZF-R7, an extremely simple and quick operation to perform, for example, after disconnecting the battery or when switching to daylight saving time. First, insert the key and leave it in the first position, then press and hold the "RES" button on the left knob, simultaneously turn on the instrument panel, and keep the button pressed until the clock starts flashing. Next, adjust the hour with the same button, switch to minutes with the lower button, and restart the panel to save the setting.

Posted on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Yamaha YZF-R7?
How to set the time on the Yamaha YZF-R7?
Yzf R7 In this tutorial, we will see how to adjust the time on the Yamaha YZF-R7, a very simple and quick operation to perform, for example, after disconnec…
How to Install the Quick Shifter System on a Yamaha YZF R7
How to Install the Quick Shifter System on a Yamaha YZF R7
Yzf R7 In this video tutorial, you will learn how to install the quick shifter for clutchless gear changes on a Yamaha YZF R7 in simple steps. The installat…
How to Remove the Seat from a Yamaha YZF-R7
How to Remove the Seat from a Yamaha YZF-R7
Yzf R7 In this short guide, see the instructions that will allow you to remove and replace the rider and passenger seat of the Yamaha YZF-R7. First, place t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos