Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to replace the headlight bulb on a Yamaha Vino scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, unscrew the two screws located at the back of the headlamp using a cross-head screwdriver. Next, separate the headlamp from the handlebars, disconnect the power connector, remove the rubber cap, and unclip the metal ring. At this point, simply extract the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.

Posted on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Yamaha Vino YJ50 Scooter?
How to Replace the Headlight Bulb on a Yamaha Vino YJ50 Scooter?
Vino In this tutorial, you will see how to replace the headlight bulb on the Yamaha Vino YJ50 scooter, a very simple and quick operation. First, ensure th…
How to replace the spark plug in the Yamaha Vino 125 scooter?
How to replace the spark plug in the Yamaha Vino 125 scooter?
Vino In this tutorial, we can see how to replace the spark plug in the Yamaha Vino 125 scooter, an extremely simple and quick operation. First of all, mak…
How to Replace the Battery in a Yamaha Vino 125 Scooter?
How to Replace the Battery in a Yamaha Vino 125 Scooter?
Vino In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos