|
Do it yourself
| |||
| ||||
Model: Yamaha Bolt
In this tutorial, you can see how to change the engine oil in a Yamaha Bolt, a very simple and quick operation. First, ensure that the engine is cool enough to work safely, then position a container beneath the bike, locate the drain hole bolt and unscrew it using a socket spanner. Allow all the oil in the system to drain out, unscrew the old filter and tighten both the replacement and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.
Posted on 17 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Bolt
Today we will see how to set the time on a 2015 Yamaha Bolt. Let's start the procedure by turning on the vehicle's dashboard, then press and hold dow…
Bolt
The exhaust pipe of the Yamaha Bolt can be replaced by loosening all the screws that secure the component to its housing: the latter will be located …
Bolt
It will be possible to replace the battery of the Yamaha Bolt by loosening the screws that secure the panel on the right side of the motorcycle, loca…
|
How to Remove the Final Drive from a BMW R 1200 GS?
To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |