|
Do it yourself
| |||
| ||||
Model: Yamaha Mt 10
In this tutorial, learn how to change the engine oil in the Yamaha MT-10, a very simple and quick operation. First, ensure the engine is sufficiently cool, then position a container beneath the bike. Locate the drain bolt and unscrew it using a 6mm hex key. Allow all the oil in the system to drain out, then unscrew the old filter and tighten both the new filter and the bolt. Finally, pour the necessary amount of oil through the designated top hole.
Posted on 25 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Mt 10
To change the engine oil on the Yamaha MT-10, you need to unscrew the oil drain plug, located at the central lower part of the bike; you will need to…
Mt 10
Today, we will go through the necessary guide on how to perform routine maintenance by changing the engine oil and oil filter on the Yamaha MT-10. Fi…
Mt 10
In this tutorial, you will see how to change the engine oil in a Yamaha MT-10, a very simple and quick operation. First, ensure that the engine is su…
|
How to Remove the Engine from the Piaggio Vespa GTS 250 - 300
In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
