Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 10
Part: Engine oil

This brief guide illustrates how to perform routine maintenance by changing the engine oil and oil filter on a Yamaha MT-10. First, place the bike on its stand and begin unscrewing the oil drain bolt located under the engine, allowing the old oil to drain into a container for about ten minutes; then unscrew the oil filter cartridge, hand-tightening the new one as shown in the video. Finally, unscrew the filler cap and top up the oil until it reaches the maximum mark!

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on the Yamaha MT-10?
How to change the engine oil on the Yamaha MT-10?
Mt 10 To change the engine oil on the Yamaha MT-10, you need to unscrew the oil drain plug, located at the central lower part of the bike; you will need to…
How to Change the Engine Oil and Oil Filter on the Yamaha MT-10
How to Change the Engine Oil and Oil Filter on the Yamaha MT-10
Mt 10 Today, we will go through the necessary guide on how to perform routine maintenance by changing the engine oil and oil filter on the Yamaha MT-10. Fi…
How to replace the motor oil in the Yamaha MT-10?
How to replace the motor oil in the Yamaha MT-10?
Mt 10 In this tutorial we can see how to replace the engine oil in the Yamaha MT-10, a very simple and quick operation. First of all, make sure that the en…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos