Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fz6
Part: Oil filter

Start the bike for a few minutes to warm the oil, making it more fluid for easier draining. Unscrew the bolt that acts as a plug for the lower drain hole (left side of the bike) and immediately unscrew the upper hole to avoid a vacuum. Collect the used oil in a container. Meanwhile, use a strap wrench to unscrew the oil filter. Before installing the new filter, remember to lubricate it and its O-ring, even with the used lubricant. Screw it in by hand and tighten it with the wrench without overdoing it. Tighten the oil drain bolt and add the new lubricant through the upper hole.

Updated on 6 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…
Fz6 These short and simple instructions will show us how to access the fuse box of the Yamaha FZ6 motorcycle, as well as the FZ6 Fazer. First, we put the…
Fz6 In today's video, you will learn how to perform the routine maintenance oil change on the Yamaha FZ6 motorcycle, in Fazer version, in simple steps. F…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos