Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on a Triumph Speed Triple?

Model: Triumph Speed Triple
Part: Clutch

Video tutorial

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing.

This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Replacement of the clutch for the Triumph Speed Triple 1050.
Replacement of the clutch for the Triumph Speed Triple 1050.
Speed Triple In this guide, we will look at the main instructions on how to disassemble and replace the clutch of the Triumph Speed Triple 1050. First, we place t…
How to Replace the Front Brake Lever on the Triumph Speed Triple R
How to Replace the Front Brake Lever on the Triumph Speed Triple R
Speed Triple This guide will show you how to remove and replace the front brake lever on the Triumph Speed Triple R motorcycle in simple and quick steps. First, p…
How to Repair the Spring Clutch of a Triumph Speed Triple?
How to Repair the Spring Clutch of a Triumph Speed Triple?
Speed Triple To repair the spring clutch of a Triumph Speed Triple, remove the cover shown in the video, located on the right side of the bike. Once this piece is…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos