Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Lever on the Triumph Speed Triple R

Model: Triumph Speed Triple
Part:

Video tutorial

This guide will show you how to remove and replace the front brake lever on the Triumph Speed Triple R motorcycle in simple and quick steps. First, place the motorcycle on a stand and begin to unscrew the fixing pin of the front brake lever using a socket and spanner.

Then, remove the old brake lever and replace it with the new one, adjusting the lever's travel accordingly. Similarly, you will also remove and replace the clutch lever, disconnecting and reconnecting the steel clutch cable!


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Lever on the Triumph Speed Triple S
How to Replace the Front Brake Lever on the Triumph Speed Triple S
Speed Triple Discover in this brief and simple guide how to remove and replace the brake lever on the Triumph Speed Triple S. First, place the motorcycle on its s…
Replace the Front Brake Pads on the Triumph Speed Triple 1050
Replace the Front Brake Pads on the Triumph Speed Triple 1050
Speed Triple This guide shows you how to remove and replace the front brake pads on the Triumph Speed Triple 1050. First, place the bike on a stand and start unsc…
How to Replace the Rear Brake Pads on a Triumph Speed Triple?
How to Replace the Rear Brake Pads on a Triumph Speed Triple?
Speed Triple To replace the rear brake pads on a Triumph Speed Triple, loosen the screws that secure the rear brake caliper to the corresponding disc. Once these …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos