Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Lever on the Triumph Speed Triple S

Model: Triumph Speed Triple
Part:

Video tutorial

Discover in this brief and simple guide how to remove and replace the brake lever on the Triumph Speed Triple S. First, place the motorcycle on its stand and begin by unscrewing and removing the fastening pin of the brake lever using a socket spanner; then lubricate the area around the lever to facilitate the installation of the new one. At this point, secure the lever with the new screw and adjust the travel of the front brake lever afterwards, following the video tutorial to the end!


Updated on 15 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Lever on the Triumph Speed Triple R
How to Replace the Front Brake Lever on the Triumph Speed Triple R
Speed Triple This guide will show you how to remove and replace the front brake lever on the Triumph Speed Triple R motorcycle in simple and quick steps. First, p…
Replace the Front Brake Pads on the Triumph Speed Triple 1050
Replace the Front Brake Pads on the Triumph Speed Triple 1050
Speed Triple This guide shows you how to remove and replace the front brake pads on the Triumph Speed Triple 1050. First, place the bike on a stand and start unsc…
How to Replace the Brake Pads on a Triumph Speed Triple
How to Replace the Brake Pads on a Triumph Speed Triple
Speed Triple To replace the brake pads on a Triumph Speed Triple, you need to perform the same operation for both the rear and front wheels: in both cases, it wil…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos