Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Spring Clutch of a Triumph Speed Triple?

Model: Triumph Speed Triple
Part: Clutch

Video tutorial

To repair the spring clutch of a Triumph Speed Triple, remove the cover shown in the video, located on the right side of the bike. Once this piece is removed, you will be able to unscrew the bolts of the clutch cover, gaining access.

To repair it, you may need to remove the discs: these should be pulled out once the central pin and the corresponding springs have been loosened. The discs should be cleaned, lubricated, or replaced if necessary.

Once these operations are completed, you can reassemble all the previously removed parts.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Replacement of the clutch for the Triumph Speed Triple 1050.
Replacement of the clutch for the Triumph Speed Triple 1050.
Speed Triple In this guide, we will look at the main instructions on how to disassemble and replace the clutch of the Triumph Speed Triple 1050. First, we place t…
How to Replace the Clutch on a Triumph Speed Triple?
How to Replace the Clutch on a Triumph Speed Triple?
Speed Triple To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, nam…
How to Replace the Front Brake Lever on the Triumph Speed Triple R
How to Replace the Front Brake Lever on the Triumph Speed Triple R
Speed Triple This guide will show you how to remove and replace the front brake lever on the Triumph Speed Triple R motorcycle in simple and quick steps. First, p…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos