Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Cbr 954rr
In this tutorial we can see how to replace the engine oil in the Honda CBR 954RR, an extremely simple and quick operation. First of all, we wait for the engine to cool down sufficiently, then we place a container under the motorcycle, locate the drain hole bolt and unscrew it using a 12mm socket wrench. We then let all the oil in the system drain out, remove the old filter and tighten both the replacement filter and the bolt. At this point, all that's left to do is pour in the required amount of oil through the designated top hole.

Posted on 13 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Honda CBR 250?
How to replace the motor oil in the Honda CBR 250?
Cbr 250r In this tutorial we can see how to replace the engine oil in the Honda CBR 250, a very simple and quick operation. First of all, make sure that the e…
How to Change the Engine Oil on the Honda CBR 1000RR?
How to Change the Engine Oil on the Honda CBR 1000RR?
Cbr 1000rr To change the engine oil on the Honda CBR 1000RR, unscrew the plug located at the central lower part of the bike to collect all the used oil in a sui…
How to Change the Engine Oil on a 2007 Honda CBR 600
How to Change the Engine Oil on a 2007 Honda CBR 600
Cbr 600 Rr In this video tutorial, you will learn how to change the engine oil and oil filter while performing the regular maintenance service on the 2007 Honda…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos