Replacing the Battery on Yamaha MT-07

Model: Yamaha Mt 07
Part: Battery

This video is currently unavailable

Unscrew the two rear bolts securing the seat. Once removed, you will see the battery.

Above it, there is a retaining bracket: unscrew the bolts securing it and remove the bracket. Now proceed to disconnect the battery terminals: always start by unscrewing and then disconnecting the negative terminal, followed by the positive.

Remove the battery and insert a new one equivalent to the original, then reverse the process until fully reassembled. It's that simple!

Updated on 15 April 2026 by ScegliAuto

Related tutorials

How to Replace the Battery of the Yamaha MT-07

Mt 07 Today, discover the procedure for removing and replacing the battery of the Yamaha MT-07 motorcycle in simple and quick steps. First, place the motor…

How to Install the Power Battery in the Yamaha MT 07?

Mt 07 Let's see how to replace the 12V power battery in the Yamaha MT 07. First, remove the passenger seat, then unscrew the two bolts of the fixing bracke…

How to Remove the Battery from a Yamaha MT-07

Mt 07 Before you begin, position your Yamaha MT-07 on its side stand. Start by removing the rider's seat by undoing the lower fixing bolts. Next, remove th…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!

by ScegliAuto

Replacing the Battery on Yamaha MT-07

Related tutorials

How to Set the Clock on the Yamaha Xmax 300?

More videos