|
Do it yourself
| |||
| ||||
Model: Yamaha Tmax
In this video tutorial, we will see the main steps to bleed and replace the antifreeze or coolant on a Yamaha Tmax 500 scooter. First, remove the footrests to access the coolant reservoir; then unscrew all the fastening screws to gain access. At this point, remove the filler cap from the reservoir and open the radiator drain screw, allowing it to drain into a container; then fill the reservoir with new coolant, ensuring it is at the correct level!
Updated on 15 April 2026 by ScegliAuto
This video is currently unavailable
Related tutorials
Tmax
Changing the transmission oil on the Yamaha TMAX scooter, as shown in this tutorial, is an extremely simple and quick task. First, ensure the engine …
Tmax
Today's instructions allow us to reset the transmission belt change on the Yamaha Tmax scooter, in simple and quick steps. First, we put the scooter …
Tmax
In this tutorial, we will see how to set the time on the Yamaha TMAX scooter, a very simple and quick operation to perform, for example, after discon…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
