Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil in the Aprilia Tuareg 660?

Model: Aprilia Tuareg 660
Part: Engine oil

Video tutorial

In order to replace the motor oil of the Aprilia Tuareg 660, you need to unscrew the drain plug of the oil tank, which will be located in the central lower part of the motorcycle: once the plug is unscrewed, you can drain the used oil into a properly positioned container.

The oil filter in this area of the motorcycle can also be removed from its housing in order to replace it with a new spare part; after the replacement, you can pour in the new oil through the vent on the right side of the vehicle.


Posted on 10 March 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Aprilia Tuareg 660?
How to Change the Engine Oil of the Aprilia Tuareg 660?
Tuareg 660 To change the engine oil of the Aprilia Tuareg 660, first loosen the oil drain plug located at the central lower part of the vehicle. Once the drain …
How to Change Engine Oil in an Aprilia Tuareg 660?
How to Change Engine Oil in an Aprilia Tuareg 660?
Tuareg 660 In this tutorial, you will see how to change the engine oil in an Aprilia Tuareg 660, a very simple and quick operation. First, ensure that the engin…
How to replace the air filter on the Aprilia Tuareg 660?
How to replace the air filter on the Aprilia Tuareg 660?
Tuareg 660 To replace the air filter on the Aprilia Tuareg 660, loosen the screws that secure the panel located at the front of the bike, just behind the handle…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos