Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Aprilia Tuareg 660?

Model: Aprilia Tuareg 660
Part: Engine oil

Video tutorial

To change the engine oil of the Aprilia Tuareg 660, first loosen the oil drain plug located at the central lower part of the vehicle. Once the drain plug is loosened, you can collect the used oil in a suitably positioned container.

After all the oil has drained out, remove the filter located at the front bottom of the bike, replacing it with a new one. After the replacement, you can top up the oil by pouring it through the breather located on the right side of the bike.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How do you replace the motor oil in the Aprilia Tuareg 660?
How do you replace the motor oil in the Aprilia Tuareg 660?
Tuareg 660 In order to replace the motor oil of the Aprilia Tuareg 660, you need to unscrew the drain plug of the oil tank, which will be located in the central…
How to Change Engine Oil in an Aprilia Tuareg 660?
How to Change Engine Oil in an Aprilia Tuareg 660?
Tuareg 660 In this tutorial, you will see how to change the engine oil in an Aprilia Tuareg 660, a very simple and quick operation. First, ensure that the engin…
How do you replace the air filter of the Aprilia Tuareg 660?
How do you replace the air filter of the Aprilia Tuareg 660?
Tuareg 660 The replacement of the air filter on the Aprilia Tuareg 660 requires loosening the screws that hold the panel in the front of the vehicle, immediatel…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos