Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, you will see how to change the engine oil in an Aprilia Tuareg 660, a very simple and quick operation. First, ensure that the engine is cool enough to work safely, then remove the lower cover and place a container underneath the bike. Next, unscrew the drain bolt with an Allen key, allowing all the oil in the system to drain out, and remove the old filter. Finally, tighten both the new filter and the drain bolt, reassemble everything, and add the required amount of oil through the designated upper hole.

Posted on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Tuareg 660 In order to replace the motor oil of the Aprilia Tuareg 660, you need to unscrew the drain plug of the oil tank, which will be located in the central…
Tuareg 660 To change the engine oil of the Aprilia Tuareg 660, first loosen the oil drain plug located at the central lower part of the vehicle. Once the drain …
Tuareg 660 In this guide, we will provide instructions for removing and replacing the rear tyre on the Aprilia Tuareg 660. First, place the motorcycle on a stan…

How to Replace the Air Filter on a Harley Davidson Dyna?

To replace the air filter on a Harley Davidson Dyna, loosen the screws securing the cover located on the right side of the bike, just below the fuel tank. Once the cover is removed, you will locate the filter underneath: it must be removed from its housing by unscrewing the fastening screws and sliding it out from its compartment. After the old filter has been removed, position the new replacement part, securing it in place with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos