Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Shock Absorber from a Yamaha Tenere 700?

Model: Yamaha Tenere 700
Part: Shocks

Video tutorial

To remove the rear shock absorber from a Yamaha Tenere 700, loosen the bolts securing the linkage positioned perpendicular to the shock absorber. By removing the linkage, you will be able to unscrew the bolts securing the shock absorber mounts and remove them as well.

After loosening the bolts that secure the shock absorber from the inside, you can slide the piece out and replace it with a new spare part. Position the new shock absorber and secure it with the corresponding bolts while installing the appropriate mounts.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on a Yamaha Tenere 700
How to Replace the Rear Brake Pads on a Yamaha Tenere 700
Tenere 700 To replace the rear brake pads on a Yamaha Tenere 700, you will need a screwdriver and a hammer to remove the pin to which the pads are attached. Pos…
How to Replace the Spark Plugs on the Yamaha Tenere 700
How to Replace the Spark Plugs on the Yamaha Tenere 700
Tenere 700 Today, we will discover the instructions that will allow us to remove and replace the spark plugs in the engine of the Yamaha Tenere 700 enduro motor…
How to Replace the Air Filter on the Yamaha Ténéré 700
How to Replace the Air Filter on the Yamaha Ténéré 700
Tenere 700 To replace the air filter on the Yamaha Ténéré 700, you need to detach the rear part of the seat by inserting the key into the designated lock and tu…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos