Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Xmax 300
Part:

This video shows the steps to remove the front body panel on a Yamaha Xmax 300 scooter. First, lever on the sides of the front panel to unclip and remove it; this will allow access to the battery. Next, unclip the side panels by gently prising on the sides until they are completely released; in this case, it will be necessary to remove some mounting screws located inside. Follow the video to the end to fully understand all the steps!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Xmax 300 Today you will see how to remove and replace the battery on a Yamaha Xmax 300. First, remove the fixing screws of the visor, thus removing it; then r…
Xmax 300 You can replace the battery of the Yamaha Xmax 300 by loosening the screws that secure the front panel of the bike to its housing, located at the cen…
Xmax 300 To replace the battery of the Yamaha Xmax 300, loosen the bolts located at the base of the windscreen that secure it in its housing. These screws are…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos