Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xt 660
Part: Air filter

This guide shows how to remove and replace the air filter of the Yamaha XT 660 Z engine, following the instructions below. First, place your bike on the stand and start by removing the rider's seat; then unscrew the screws securing the air filter box cover to access the filter, as shown in the video. At this point, remove the air filter cartridge and replace it with a new one of the correct type; install the filter in the correct orientation and reassemble the cover and the seat!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Yamaha XT 660 R
How to Replace the Air Filter on a Yamaha XT 660 R
Xt 660 This guide shows you how to remove and replace the engine air filter on a Yamaha XT 660 R by following these simple steps. First, remove the rider an…
How to Replace the Air Filter on Yamaha XT 660
How to Replace the Air Filter on Yamaha XT 660
Xt 660 In this video tutorial, you will learn how to remove and replace the air filter on a Yamaha XT 660 motorcycle by following these simple steps. First,…
How to Replace the Coolant in the Yamaha XT 660Z
How to Replace the Coolant in the Yamaha XT 660Z
Xt 660 This guide explains how to bleed and top up the engine coolant for the Yamaha XT 660 and XT 660Z motorcycles. First, remove the plastic cover on the …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos