Do it yourself
| ||||
|
Model: Yamaha Vino
In order to replace the Yamaha Vino oil filter, you need to unscrew the two screws located on the footrest compartment, so that the panel at the base of the saddle can be removed, giving access to the oil filler cap. Once it has been opened, it will be possible to open the cap and unscrew the exhaust one, located in the lower part of the bike. When the oil is completely out, the oil filter, located behind the muffler, will have to be removed, replacing it with a new one. After the replacement it will be possible to top up from the special vent, then covering everything with its panel.
Posted on 13 May 2024 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |