Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Yamaha T-Max 500

Model: Yamaha Tmax 500
Part: Service warning light

Video tutorial

The service light on a motorcycle is even more important than on a car. This is because if a four-wheeled vehicle has problems and stops, it remains balanced on its four wheels. A two-wheeled vehicle, however, falls over, with the consequences we can imagine.

That said, to reset the service light on a Yamaha T-Max 500, turn on the ignition and press the "reset" button located on the speedometer dial. Hold the button for about 15 to 20 seconds, during which the light will start to flash.

Upon release, the light will turn off. Switch off the ignition and restart the bike. The light will be off.


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a Yamaha TMax 500
How to Reset the Oil Light on a Yamaha TMax 500
Tmax 500 .. In this new guide for all Yamaha TMax 500 owners, we will discover how to manually reset the oil light that appears on the dashboard. First,.. …
How to Change the Battery of the Yamaha T-Max 500
How to Change the Battery of the Yamaha T-Max 500
Tmax 500 .. remove and replace the battery of the Yamaha T-Max 500 first series. First, locate the battery at the front of your scooter; then, unscrew the screws.. …
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
How to Reset the Drive Belt Service on a Yamaha TMAX 500 Scooter?
Tmax 500 .. how to reset the drive belt service on a Yamaha TMAX 500 scooter, a very simple and quick operation to perform only after completing the required scheduled.. …

How to change the engine oil in a Harley-Davidson Road King?

In this tutorial, you will see how to change the engine oil in a Harley-Davidson Road King, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then position a container under the bike, locate the drain plug, and unscrew it using a 16mm socket. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the new filter and the drain plug. At this point, simply pour the required amount of oil through the designated top hole.

Watch the video!


by ScegliAuto

More videos