Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This tutorial shows how to reset the drive belt service on a Yamaha TMAX 500 scooter, a very simple and quick operation to perform only after completing the required scheduled maintenance. Start by removing the lower right fairing, then locate the indicated white connector and set it aside. Next, insert the key, turn on the instrument panel, and disconnect the connector for at least 10 seconds. Finally, restart the panel, check that the "V-Belt" warning light has disappeared from the dashboard, and reassemble everything.

Updated on 29 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on the Yamaha TMAX 500 Scooter?
How to Reset the Oil Service on the Yamaha TMAX 500 Scooter?
Tmax 500 As shown in this tutorial, resetting the oil service on the Yamaha TMAX 500 scooter is an extremely simple and quick operation. Before proceeding, en…
Replacing the Drive Belt on a Yamaha Tmax 500
Replacing the Drive Belt on a Yamaha Tmax 500
Tmax 500 Below are the instructions that will allow you to remove and replace the drive belt on the Yamaha Tmax 500 scooter. First, place it on the centre sta…
How to Reset the Engine Warning Light on a Yamaha Tmax 500
How to Reset the Engine Warning Light on a Yamaha Tmax 500
Tmax 500 Below are the instructions to reset the engine warning light on the Yamaha Tmax 500 scooter. First, place the scooter on the centre stand and connect…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos