Do it yourself
| ||||
|
Model: Yamaha Tfx
In order to replace the front brake pads of the Yamaha TFX 150 it is necessary to loosen the two bolts that secure the brake caliper to the relative disc, using a hex wrench. Once the two bolts have been loosened, it will be possible to detach the caliper from its disc, extracting the pads that are inside. In this way it will be possible to insert the new pads inside the caliper, fixing the latter on the disc with the relative bolts. After installation it will be necessary to check that the front brake works correctly.
Posted on 31 August 2022 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |