|
Do it yourself
| |||
| ||||
Model: Yamaha Mt 07
To replace the exhaust on the Yamaha MT 07, loosen the bolts securing it to the supports. These bolts are located at the bottom of the bike and must be completely removed to extract the exhaust. The exhaust must also be detached from the front of the exhaust pipe by unscrewing the fixing bolt that connects it to the pipe. Once the exhaust is freed, remove it from its position and replace it with a new one. The new exhaust should be connected with the corresponding ring and secured to the supports.
Updated on 18 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Mt 07
To replace the exhaust on the Yamaha MT-07, loosen the bolts that secure it to the appropriate supports: these bolts are located at the bottom of the…
Mt 07
You can replace the exhaust on the Yamaha MT-07 by loosening the bolts that secure the exhaust terminal to its housing, located at the bottom of the …
Mt 07
Let's go through the steps to change the engine oil and oil filter on the Yamaha MT-07, following the instructions below. First, unscrew and remove t…
|
How to replace the coolant in the BMW S1000 R
Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.067
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |